Portal
Suchergebnisse
Results list
Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps). The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting. The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019. Additional notes for vector data: Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar. The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are: - Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM) - Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed. Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range. This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.
Advancing sustainable LED solutions to mitigate light-pollution impacts on arthropods
Raw data and R Code to do all the analysis performed for the paper "Advancing sustainable LED solutions to mitigate light-pollution impacts on arthropods". Including data for both flight-active insects and ground-dwelling arthropods combined (PT_TRF_all.csv), flight-active insects alone (ALANeX_PT_all_clean_control.csv) and ground-dwelling insects alone (ALANeX_TRF_all_clean_control.csv). For the NMDS analysis, there is a data set for the flight-active insects (ALANeX_PT_NMDS.csv) and the ground-dwelling arthropods (ALANeX_TRF_NMDS.csv). For the Morans I use the 'ALANeX_MoransI.csv' dataset.
Daily cycles in solar flux, snowmelt, transpiration, groundwater, and streamflow at Sagehen and Independence Creeks, Sierra Nevada, USA
Hydrometerological and ecohydrological time series from Sagehen Creek and Independence Creek, Sierra Nevada, USA, illustrating hydrological responses to daily cycles in snowmelt and evapotranspiration forcing. Data include 30-minute time series of - weather variables, - sap flow fluxes, - groundwater levels (in two riparian transects of shallow groundwater wells), - and stream stages (at 12 sites spanning a 500-meter elevation gradient), and daily time series of - temperature, precipitation, and snow water equivalent at three nearby snow telemetry stations - diel cycle index values for groundwater levels and stream stages, - and MODIS normalized difference snow index (NDSI) and enhanced vegetation index (EVI2) values averaged over selected subcatchments. Google Earth Engine scripts for extracting the MODIS data are also provided.
Aerosol Data Weissfluhjoch
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room. Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0). Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³). Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³). Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.
Manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland
Dataset of manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland. Typical snow profile measurements and observations are included (temperature, density, grain size, grain type, hardness, wetness), following the guidelines of the The International Classification for Seasonal Snow on the Ground (ICSSG) [Fierz, C., Armstrong, R.L., Durand, Y., Etchevers, P., Greene, E., McClung, D.M., Nishimura, K., Satyawali, P.K. and Sokratov, S.A. 2009. The International Classification for Seasonal Snow on the Ground. IHP-VII Technical Documents in Hydrology N°83, IACS Contribution N°1, UNESCO-IHP, Paris].
Environmental DNA Marine Curacao 2020
Fish taxonomic, functional and phylogenetic composition variations recovered from eDNA metabarcoding along the coast of Curacao In February 2020, we collected a total of 20 water samples, from 10 stations, with two filtration replicates per station, in the two investigated coastal areas. Each station consisted of a transect of 2 km at an overall constant distance from the coast. We recorded the GPS coordinates at the start and end of the transect, which we used to map the transect positions. We conducted eDNA sampling by using a filtration device composed of an Athena® peristaltic pump (Proactive Environmental Products LLC, Bradenton, Florida, USA; nominal flow of 1.0 L/min), a VigiDNA® 0.20 μM cross-flow filtration capsule (SPYGEN, le Bourget du Lac, France) and disposable sterile tubing for each filtration capsule. We performed two filtration replicates in parallel on each side of a boat, at each station, for 30 min corresponding to a volume of ~30 L of water filtered by each capsule. At the end of each filtration, the water inside the capsules was emptied, and we filled the capsules with 80 ml of CL1 Conservation buffer (SPYGEN, le Bourget du Lac, France) and stored at room temperature. We followed a strict contamination control protocol in both field and laboratory stages (Valentini et al., 2016). Each water sample processing included the use of disposable gloves and single-use filtration equipment to avoid any risk of contamination. Libraries were prepared with ligation using the MetaFast protocol (Fasteris).
Community structure, life-history traits and performance traits of urban cavity-nesting bees annd wasps
Background Urban ecosystems are associated with socio-ecological conditions that can filter and promote taxa. However, the strength of the effect of ecological filtering on biodiversity could vary among biotic and abiotic factors. Here, we provide the data used to investigate the effects of habitat amount, temperature, and host-enemy biotic interactions in shaping communities of cavity-nesting bees and wasps (CNBW) and their natural enemies. To do so, we installed trap-nests in 80 sites distributed along urban intensity gradients in 5 European cities (Antwerp, Paris, Poznan, Tartu and Zurich). We quantified the species richness and abundance of CNBW hosts and their natural enemies, as well as two performance traits (survival and parasitism) and two life-history traits (sex ratio and number of offspring per nest for the hosts). The dataset contains: * The taxonomic metrics on CNBW * The taxonomic metrics on the natural enemies from CNBW * The life-history traits and performance traits
Pfynwald 2019 - Dendrochronological and tree-ring isotope dataset
Data from a 17-year-long irrigation experiment (Pfynwald, Switzerland) in a naturally dry forest dominated by 100-year-old pine trees (Pinus sylvestris). This dataset includes measure tree-ring width and tree-ring isotope chronologies (stable isotope ratios of non-exchangeable hydrogen δ2H, oxygen δ18O, and carbon δ13C), for the Pfynwald experiment, including control trees, irrigation and irrigation-stop treatments until the year 2019. This dataset contains all data on which the following publication below is based. Please cite this paper together with the citation for the datafile.
Running COSMO-WRF on very-high resolution over complex terrain
This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.
Daten Bryolich-Projekt Moose und Flechten in Gärten
Im Rahmen des Bryolich-Projekts “Moose und Flechten in Gärten” wurden möglichst vollständige Artenlisten von Moosen und Flechten in 26 bzw. 7 Gärten um Wohnhäuser erstellt. In 5 dieser Gärten wurden beide Artengruppen erfasst. Zusätzlich wurden Informationen über unterschiedliche Lebensräume innerhalb der Gärten (z.B. Fläche mit Gehölzen, Fläche von Blumenbeeten) und weitere Garten-Charakteristika (z.B. Fläche des Gartens, Alter des Gartens, Einsatz von Dünger) erfasst. Details zum Projekt und den erfassten Daten können im zugehörigen Artikel (Bergamini et al. 2024) und auf der Webseite von Bryolich gefunden werden (https://www.bryolich.ch/mfig/mfig_de.html).